If you need your synthetic turf to look its best, you want to verify it is put in accurately by a professional contractor. At Green Turf, we’ve got the skills and experience needed to make your venture successful. Now we have over 10 years of experience putting in synthetic grass for all sorts of functions, and you can belief our conscientious crews to treat your property like their very own. Our proprietor Omar will personally oversee your set up to verify it is perfect down to the last detail.

The Synthetic Grass Installation Course of

Step 1: Site Prep. Earlier than we are able to lay down the artificial turf, the positioning needs to be correctly ready. This may occasionally contain many various steps depending on the requirements of your mission, equivalent to eradicating old turf or concrete, relocating electric wiring and irrigation strains, capping sprinklers, putting in new drainage traces, and adding bender board around the edges of the realm. Then, we can grade the positioning and apply a layer of compacted base fill. The base fill will help with drainage as well as create a stable, even surface for the artificial turf to go over.

Step 2: Customized Fitting the Turf. When seams are required, we minimize them in an S form reasonably than a straight line. Starting with a straight edge every time potential, we are going to roll out the artificial turf after which minimize it to size, being cautious to depart further materials around the edges. Depending on the quantity of foot traffic you count on on your synthetic turf, we could use tape or nails to safe the seams. This prevents the turf from bunching up along the seams and creating an illusion of discoloration. All turf edges will likely be secured with nails. We know how you can drive the nails accurately so the nail heads will likely be hidden and Pose De Tourbe you will not have any dimpling resulting from overtight nails.

Step 3: Tucking Turf Edges. We use a particular tool known as a marvel bar to tuck the edges of the synthetic turf down around all the perimeter. This hides the exposed edge of the backing and helps to create a lush and pure look at the edges of the turf.

Step 4: Making use of Infill. An infill product corresponding to Durafill, sand, or crumb rubber have to be applied over the synthetic turf to create ballast and add cushioning to the surface. We use a power brush to separate the blades as the infill is utilized, which helps make sure the infill granules get down deep between the blades to assist hold them upright.

Step 5: Last Groom. As a ultimate step, we are going to make yet one more pass with the broom to get all your blades standing up in the same direction and to take away any extra debris.

Ready to transform Your Property with New Artificial Grass?

In the event you want to be taught extra about having Inexperienced Turf install your new synthetic grass, please contact us at (951) 656-4150 at this time. Our prices are among the bottom in southern California and we’ll be completely satisfied to give you a quote.