boat cleat Covers Direct® Bimini Tops come customary with all of the hardware needed to mount and enjoy your top. All Bimini fittings under are offered as alternative elements. See our bimini tops if you are wanting to cost a new top to your boat fitting.
The nylon that we use is a USA made, heavy-obligation, sturdy and durable artificial polymer. If you have any inquiries concerning where by and how to use marine fitting (controlc.com), you can call us at the internet site. Available in Black.
Our stainless fittings are 316 composition, marine-grade stainless steel.
Deck Hinges
Part Number: 7405
– Excellent for normal mounting functions
– Base size 3/4″ by 2″
– Panhead screw, drilled for #10 screws
– Footprint: 7/8″ vast
– Between holes on middle: 1 9/16″
Deck Hinge, ninety Degrees
Part Number: 88320
– Excellent for Marine Fitting customary mounting functions
– Base size 3/4″ by 2″
– Panhead screw, drilled for #10 screws
– Footprint: 7/8″ Wide
– Between holes on heart: 1 5/8″
Part Number: UNDH
– Easy mounting on any floor, pivots to adapt to any angle
– 2 5/8″ lengthy x 13/16″ wide x 1 5/8″ high
– Footprint: 2 7/16″ lengthy x 7/8″ extensive
– Between holes on center: 1 9/16″
Universal Deck Hinge
Part Number: UNDHSS
– Easy mounting on any surface, pivots to adapt to any angle
– 2 5/8″ lengthy x 13/16″ wide x 1 5/8″ high
– Footprint: 2 5/8″ long x 7/8″ huge
– Between middle holes: 2 1/32″
Part Number: 88320N
Combination Deck Hinge Slide/Lock – Right Side
Part Number: 7445RB
Combination Deck Hinge Slide/Lock – Left Side
Part Number: 7445LB
– Used to attach the Bimini top to the deck when using a slide track
Deck Hinge Drilled for Quick-Release Pin
Part Number: 7405D
– Order with our quick release pin, Part# 88547, for simple elimination of your Bimini top
Eye Ends
1″ Square Outside Eye End With Set Screw
Part Number: 7517
Part Number: 7406
7/8″ Outside Eye Ends
Part Number: 88313
– Fits spherical tubing
– Does not include set screw
Inside Eye End
Part Number: 7408
1″ Square Outside Eye End
Part Number: 7410
Jaw Slides
1″ Square Jaw Slide
Part Number: 7515
– Fits sq. tubing
$8. Makes installation of brace kits. Jaw slides a breeze.
– Fits round tubing
7/8″ Hinged Jaw Slide
Part Number: HJSSS
– Makes set up of brace kits and jaw slides a breeze.
– Fits spherical tubing
$20.22
7/8″ Jaw Slide
Part Number: 7407
7/8″ Jaw Slides
Part Number: 88316
– Fits spherical tubing
$17.Eighty four
Other
Product
Material
Price
Quantity
Concave Rail Adaptor
Part Number: 61111
– Used for rail mounting purposes
Channel Trim End Cap – Fits Over .850 Track
Part Number: 7404B
– Used at the top of a slide monitor
Nylon
Quick Release Pin with Lanyard and Eye
Part Number: 88547
– Use with deck hinge 88320N or 7405BD for simple elimination.
– 6″ cable-loop finish.
– Rod is 1/4″ diameter, 1 5/8″ long, and has a 3/4″ grip.
– The outlet must be .265″, which is barely bigger than the pre-drilled gap so you don’t have to drive the pin via the opening
Stainless
Eye Strap / Pad Eye / Strap Eye
Part Number: ES
– Length 1 7/8″, Height 1/2″
– Drilled for #eight screws
– Sold Individually
Nickel Plated Brass
$8.57
