WARNING

Food Poisoning Hazard

Do not let meals sit in oven a couple of hour earlier than or after cooking.

Doing so may end up in food poisoning or sickness.Necessary: Meals have to be at serving temperature before inserting it in the warmed oven. Meals may be held as much as 1 hour; nonetheless, breads and casseroles may change into too dry if left within the oven throughout the Keep Warm perform. For finest outcomes, cowl food. The Keep Warm feature permits sizzling cooked foods to remain at serving temperature.To use:1. Press KEEP Heat.2. Press the quantity keypads to set the specified temperature. If the temperature entered just isn’t in the vary of the temperatures allowed, the minimal or maximum allowed temperature will likely be displayed. Enter a temperature within the allowable vary.

Word: The temperature could also be modified at any time by pressing the quantity keypads to enter the desired temperature after which Begin/ .3. Press Begin/ .4. Place food within the oven.5. Press OFF/CANCEL/6. when finished.7. Remove meals from the oven.

To Cancel Keep Warm:1. Press OFF/CANCEL/2. Remove meals from oven.

Favorite

On demand for some furnaces from Koyo Thermo Systems it is possible to inte-grate a Stange controller instead of a normal controller to make use of the benefits of Stange controller. The program controller mannequin varies with the system complexity. Utilizing native peripherals the system will be enlarged on demand with additional modules per digital and analog outputs and also belatedly connected to an ECS-2000.

Different problems can cause the digital management board to fail. Normal put on and tear eventually takes it toll on a circuit board and causes its failure. A short circuit in a part such as a heating element, fan, management panel or sensor can damage the electronic management board. A service tech can typically determine the cause of a control board failure and substitute extra elements if needed to stop the management board from going out shortly after replacing it.

As an alternative of the program controller SE-502 the SE-504 presents 30 precise values and sixty four digital tracks. 20 control zones with 8 parameter units, tolerances and a pair of thresholds per zone increase the functionality of this controller enormous. Additionally the gadget is able to input forty eight actual values (norm alerts, thermocouples, PT100) and the included S5-appropriate PLC can function 20.000 instructions from CPU-928 instruction set. 40 formulation are available. The method is secured with 200 alarms (priority, delay and alarm message configurable). Another special perform which is not obtainable with SE-502 is nitriding coefficient. Its dimensions are very compact 288 x 144 x 105mm and it additionally contains an illuminated LC-show with a resolution of 160 x 128 pixel.

This Stange Elektronik program controller supports the method configuration saving both on Pc and Memory-Card. For other configuration characteristic please refer again to SE-502.

The distinction between SE-502 and SE-504 regarding programming is the larger quantity of 50 packages and 50 segments.

Underneath operations the variety of operator panels enlarges from 6 to 8.

The Stange Elektronik program controller SE-504 affords a bigger Range hood controller of management potentialities and is a compact and simply configurable control device for complicated processes.

That is all there may be to this one; the sensor was set for 66C, and the controller was ready to carry temperature properly sufficient to keep the LO within one hundred fifty Hz when subjected to the muffin fan 10-minute stress test. You possibly can most likely get even better stability through the use of some insulation around the LO, however even with out it, the stability is much better.