Now we have all experienced the annoyance of our PC or Laptop losing its connection with the wireless router in our properties – this guide will enable you to reduce the possibilities of this taking place whilst additionally boosting the range of the router.

1 – Location of the Router

If doable it is best to place your wireless router in a location that’s central to the realm in which you wish to obtain a signal. If a router is positioned at one end of your house the signal has additional to travel to succeed in the opposite end – by finding the router is a central position this distance is reduced.

2 – Surrounding Space

It’s advised that you do not place the router in close proximity to walls or large metal objects as these could drain the energy of the signal thus reducing its reach. Also be aware that some cordless home phones have been known to cause interference with wireless routers – the identical is true of microwave ovens.

three – Change Your Routers Antenna

The antenna (or aerial) that comes as standard on most routers is «Omni directional – this implies that it broadcasts the wireless signal equally in all directions (360 degrees). This is fine if you are able to find your router centrally (as talked about in Point 1) – however for many this isn’t possible. By upgrading to a high acquire antennae that focuses the signal in a single direction you possibly can boost your signal range and energy significantly.

4 – Install a Repeater

A repeater merely boosts a wireless signal and sends it on its way – no more no less. These units require no additional cabling – to implement a repeater you simply discover a suitable location (for example halfway between the wireless router and the realm that has a weak signal) and energy the repeater on. It is that easy!

5 – Upgrade Your Routers Firmware

Wireless router manufacturers repeatedly upgrade the firmware (the built in software) of their products to extend signal range and performance. These upgrades are normally free. To upgrade your routers firmware visit the producers website and observe the directions on your router model.

6 – Use Equipment from a Single Manufacturer

Whilst all routers and adapters are designed to work with one another you possibly can often see performance improvements when using both a router and adapter made by the same manufacturer. This is mainly down to the fact that some router manufacturers make the most of signal boosting methods that only give optimum performance when used with adapters made by themselves.

If you have any inquiries concerning where and exactly how to make use of wifiblvd, you can contact us at our own web-site.