In case you live in a local weather the place the temperature goes up frequently, then an AC can make the living conditions much more pleasant and comfortable. As is the case with many pieces of technology, an AC additionally loses if proper functioning after a period of use. It’s essential that you simply keep on gauging the efficiency of your AC in order that if issues come up, they can be rectified earlier than it’s too late.

Here are some tips on the best way to tell if your air conditioner is running efficiently.

Prepare your AC for testing

You must replace your furnace filter after which remove all vent coverings. This is important to make sure that airflow is smooth and not restricted. Just pull out the loose vents or use a tool to pull out any tight-fitted covers. Typically you would possibly need assistance from an AC upkeep firm if you could remove the vents which are positioned in an outdoor unit. They can do this job more effectively and safely.

Decide the totally different ducts of the AC

You need to know which are the provision and the return ducts in your AC. With a purpose to determine this, place a tissue over each duct. If the tissue starts flying away from the duct, then that’s your supply duct, whereas if the tissue paper is sucked in, then that is your return duct.

Check the Temperature of Both Ducts

You are able to do this in some quite simple steps. Turn in your AC, and let it run for at the very least 15 minutes. Then take a thermometer and place it inside the provision duct. Check if the thermometer is under the current room temperature to make sure a correct reading. You need to use any thermometer, even a fridge thermometer will work. Keep in mind that the provision duct is that part of the AC that throws cool air into your room. Keep the thermometer over there for 10 minutes. Note down this temperature.

Now go to the second step and keep the identical thermometer on the return vent, again for ten minutes. As said earlier than, the return vent is that part of the AC which pulls within the room air and delivers it to the HVAC system. Note this reading too.

Now subtract both the readings to calculate your results.

Results Will Tell the Efficiency of Your AC

If there’s a difference of 20 degrees between your provide and return ducts, then your AC is working fine. But if this temperature is less than 20 degrees, then this can tell you that your AC is just not working efficiently. There can be many possibilities of this problem. One may be that there is a leak in the system, or another may be that you should exchange the HVAC filter.

If you loved this post and you would like to get a lot more info with regards to 천정형에어컨 kindly go to our web page.