We’ve got all experienced the annoyance of our PC or Laptop dropping its connection with the wireless router in our properties – this guide will help you to reduce the probabilities of this happening whilst additionally boosting the range of the router.

1 – Location of the Router

If attainable it is best to put your wireless router in a location that’s central to the world in which you want to receive a signal. If a router is placed at one end of your house the signal has additional to travel to achieve the opposite end – by finding the router is a central position this distance is reduced.

2 – Surrounding Space

It is advised that you do not place the router in shut proximity to walls or large metal objects as these could drain the power of the signal thus reducing its reach. Also be aware that some cordless home phones have been known to cause interference with wireless routers – the identical is true of microwave ovens.

3 – Replace Your Routers Antenna

The antenna (or aerial) that comes as normal on most routers is «Omni directional – this means that it broadcasts the wireless signal equally in all directions (360 degrees). This is fine if you’re able to find your router centrally (as talked about in Point 1) – nonetheless for most this will not be possible. By upgrading to a high gain antennae that focuses the signal in a single direction you can increase your signal range and strength significantly.

4 – Install a Repeater

A repeater merely boosts a wireless signal and sends it on its way – no more no less. These gadgets require no further cabling – to implement a repeater you simply discover a suitable location (for example halfway between the wireless router and the realm that has a weak signal) and power the repeater on. It’s that straightforward!

5 – Upgrade Your Routers Firmware

Wireless router manufacturers usually upgrade the firmware (the inbuilt software) of their products to extend signal range and performance. These upgrades are often free. To upgrade your routers firmware visit the manufacturers website and comply with the instructions on your router model.

6 – Use Equipment from a Single Manufacturer

Whilst all routers and adapters are designed to work with one another you may usually see performance improvements when using both a router and adapter made by the same manufacturer. This is mainly down to the truth that some router producers make the most of signal boosting techniques that only give optimal performance when used with adapters made by themselves.

If you treasured this article so you would like to obtain more info concerning wifiblvd please visit our website.